The internet has grown so ingrained in our everyday life that we naturally turn to it anytime we experience issues, whether they be technological or otherwise. As a result, it can be bewildering and irritating when we suffer internet connection troubles and have no method to hunt for a solution online.

There’s a significant probability that if you work remotely, you’ve felt the anguish of being without an internet connection.

Although you’ve checked each gadget to confirm connection issues, it continues to indicate that you have Wifi. This peculiar occurrence may have a couple of different causes. Let’s get through how to resolve network “connected no internet” issues.

Guide to Fix The Internet (Troubleshoot Methods)

Guide to Fix The Internet Troubleshoot Methods

There are several steps to fix connected to the device but no internet WIFI problem that will force start the connection is given below;

Method #1: Check If Your Network Provider Service Is Down

Check If Your Network Provider Service Is Down

The most probable reason is that your internet provider is experiencing issues if none of your devices can connect to any internet wifi, although your wifi signal is still on. It’s generally an excellent way to verify this before restarting and moving cables around.

You may check to see if there is a disruption in your region by turning on the cellular data on your mobile device and visiting your internet provider’s customer service sites or social media platforms.

If you still can’t discover the answer, search for unbiased online sites here. However, you may always contact your service provider to find out whether the unavailability of the internet in your location is a result of a service issue with them.

Method #2: Restart Your Router And Modem (Very Important Step)

Restart Your Router And Modem

Have you attempted switching it off and back on? The answer is so absurdly straightforward that it has lost any originality. However, if you are not connected to wifi internet, it’s an easy solution that you should try with the most straightforward fixes.

Note: This step is very important and works most of the time.

If you have a router and modem at home, turn them off, disconnect the plugs, and wait for a few minutes. Connect the pins back in the modem first, and plug in the router after a minute. Usually, these devices take up to five to 10 minutes to reload and re-power.

Then check on your gadgets like phones or laptops whether they are connected or not. It is the most acceptable method if you’re trying to figure out how to resolve “internet not working” issues at home. Nonetheless, sometimes this doesn’t work. Let’s get to step 3 if it could be helpful.

Method #3: Switch Wi-Fi Bandwidth (2.4 GHz and 5 GHz)

Switch Wi Fi Bandwidth

If you’re experiencing issues with your internet connection, one possible solution is to switch Wi-Fi bands between 2.4 GHz and 5 GHz. This can be done through your router settings or by using a dual-band Wi-Fi extender.

Sometimes certain devices work better on one band than the other, so switching can improve connectivity and speed. Additionally, overcrowding on a particular band can cause interference, so switching can help alleviate this issue.

How to do it?

To switch between Wi-Fi bands, you can access your router’s settings through a web browser and navigate to the wireless section. Look for an option to change the frequency band or channel and select the 5 GHz band. Save your settings and then reconnect your device to the Wi-Fi network.

Alternatively, you can use a dual-band Wi-Fi extender that can automatically connect your devices to the best available frequency band. Simply plug in the extender and follow the instructions to set it up.

The extender will then automatically switch between 2.4 GHz and 5 GHz bands depending on which one offers the best connection.

Method #4: Check Router Settings

Check Router Settings

There might be an issue with your connection permissions if there is no internet, but your broadband service or router is not the issue. Go to MAC (Media Access Control).

Identities are included on every home Wifi and are used to provide such devices access to the network.

It may cause your gadgets to shut off instantly if specific settings are not correctly specified. You must check to determine if this system is in on “allow” or “deny” configuration.

If you’re experiencing “Network Connected But Internet not working” troubles, follow these directions to repair them;

  • Search and click the window key. Enter “cmd” into the search area once it appears.
  • Right-click on an app and a context menu will display on the screen. Now choose the option “run as administrator.”
  • If you again right-click, it will command an immediate display on your device. Now enter the command “ipconfig” and hit enter after typing it.
  • Your static IP address ought to appear at this point. You’ll receive a number as a result that looks like this: 192.168.X.X. Now copy this.
  • Launch your web browser, paste or insert the number in the search box, and then press the enter key. This should display the administrative interface for your router.
  • But you’ll be required to enter your credentials to access the dashboard. The fact that these credentials differ from your WIFI id should not be overlooked. How do you locate this data? The username is often displayed on the back of your router, so have a look there. The default router password is likely to be “admin” if you haven’t updated it.
  • Accessibility to your setting option needs to be available at this point. There you should find your MAC address filter option. Check to see if it is deactivated or if a filtering restriction you have never established prevents the internet from working.

Method #5: Time To Reset The Network

Time To Reset The Network

Thus, you’ve already disconnected plugs, restarted, and double-checked your wifi connections. We commonly advise starting again with a network reset if you’ve tried everything and are still trapped in “no network” land.

Here’s the procedure to reconfigure your network settings to resolve issues with no internet connection.

  • Enter “settings” into the search field on your device.
  • Locate and select the option “network and internet.”
  • You ought to have a menu on the left. Find the “status” option and choose it.
  • Locate and choose the option “network troubleshooter.”
  • You should see “network reset” among your choices.
  • You may reset all of your gadgets and network configurations by clicking “network reset,” which will guide you through a process. Once you’ve finished, click your wifi symbol, confirm your network is visible, and connect to it.

Therefore, there are still choices available to you if there is no connecting wifi internet. In this case, none of your gadgets can connect to your Wifi. The solutions mentioned above are the best ways to fix the internet connection.

The best option for you may be to contact your internet provider if you’ve tried everything mentioned above and it still doesn’t work.

One of the two things may be wrong; either you have defective devices that must be changed (to check this, connected to a friend’s hotspot), or there may be an issue with your service provider’s connection to your particular area.

Method #6: Internet Fixing Video Guide

Pro Tip: If you are an entrepreneur, I would advise you to attend Bizleads Virtual Summit.

Internet Wifi Extender Fixes


Wifi extenders have become the need of today’s consumers who have large houses or workplaces to boost the intensity of their wifi connection. One of the most common reasons for extenders’ popularity is that they extend the range of wifi signals. In addition, it is also less expensive compared to a second router.

If you are facing some issues with wifi extender, the most common problem is that connected to no internet wifi extender even though it looks connected. To fix such a problem, here are a few steps that will vanish your trouble, and you can continue with your precious work.

Five-Step Fix:

  1. Check the placement: Wi-Fi extenders need to be placed in an area that is within range of your router’s Wi-Fi signal but also close enough to the areas where you need better coverage. If you’re experiencing issues with your Wi-Fi extender, check to make sure it’s in the optimal location.
  2. Check the connection: Ensure that your Wi-Fi extender is connected to your router’s Wi-Fi network. You can do this by checking the Wi-Fi network settings on your device or by logging into the extender’s web interface.
  3. Check the firmware: Ensure that your Wi-Fi extender has the latest firmware updates. You can usually check for firmware updates within the extender’s web interface or by downloading the latest firmware from the manufacturer’s website.
  4. Restart the extender: Sometimes a simple restart can resolve issues with your Wi-Fi extender. Try turning it off, unplugging it from the power source, waiting a few seconds, and then plugging it back in and turning it on again.
  5. Reset the extender: If all else fails, you can try resetting your Wi-Fi extender to its factory settings. This will erase all of the extender’s settings and configurations, so make sure you have the necessary information to reconfigure it. To reset the extender, press and hold the reset button for a few seconds until the lights on the device turn off and then turn back on again.

Note: Be at peace; we are not recommending something harmful to your device.

Internet Wifi ACT:

ACT is a broadband network that provides internet services to consumers. If you’re facing a problem with internet connectivity, try to follow the simple steps below;

  • First of all, connect to ACT wifi connection.
  • Secondly, go to the web browser and open the ACT web portal
  • Thirdly, sign in with your username and password.

Note: if not registered, register yourself first on the ACT portal.

If all of the above solutions don’t work and still show that your internet is connected but not working, try turning off and on the router continually until it starts working.

Connected But No Internet On Android Device


Despite being connected to Wifi, your Android devices cannot access the net, which makes you incapable of browsing websites, listening to music, and chit-chatting with your pals. Minutes later, a notification on your Android device screen shows the message “Wifi has no internet connectivity.”

The frequent cause of the issues is the router or internet service provider, but your device’s network configuration or settings might potentially block internet access.

After many attempts and still not connected wifi internet, then you’ve come to the correct place to solve the issue. Go through the post that we have mentioned to fix the problems and resolve the Android internet connection.

The most hand devices that we all mostly use are handphones, tablets, and laptops and the methods we explain are practically performed by us.

When there is a pop-up on the screen that shows the device is connected but no internet on your Android phone or Android tablet device, it becomes so irritating that we all want an immediate solution. Thus we’re here to assist with that in the hopes of resolving your problems.

10 Ways to Fix Android Internet


As a specific cause does not make these connection issues, There are numerous potential solutions. Try some of the solutions we’ve provided below to get the internet working again.

1. Check Your Network Connection

You may encounter this problem sometimes if your router is not properly connected to the internet. Therefore, click your Wifi with another Android device to check if you can go online.

Sign into your wifi connection and verify that all the internet service provider setup information is correct, including username and password details. If it still makes you puzzled, consult the provider of your internet services or check the back of your router for details.

2. Inspect If Your Mobile Data Is Turned Off

When you connect to the internet after turning on mobile data, the internet will not be accessible to you. Therefore, to solve the problem, try turning off mobile data.

Occasionally, android gives priority to Wifi on mobile data whenever you connect to Wifi. Some of the devices require login details, while others don’t.

Android may continue consuming mobile data after checking in since it may not be recognized as an active network. It’s possible that in this situation, android won’t be capable of connecting to the internet of both networks.

3. Try To Enable And Disable Android Wifi.

Restart the wifi adapter in Android, just like you did on PC. A WIFI reset usually resolves networking difficulties since it compels your Android to refresh the DNS and review the setup folders again. However, you’ve to open the hiding settings page.

To unlock the phone, dial the keypad and enter these digits *#*#4636#*#*.

The testing settings panel that is hidden will be activated. Now go to “wifi information,” click “wifi API,” and then click “disable the network.”

As an outcome, the wifi device will be turned off. Select “enable network” to start the wifi service after a brief delay, and the problem should likely to be resolved.

4. Monitor The Settings Of Time And Date

An item that appears ordinary but has an incorrect time and date setup can create many issues. In general, android devices automatically acquire date and time data from your network provider.

Therefore, if you’ve altered those settings. You better set them back, right? And if the option is set to manual, the date and time may not be changed if the device is restarted.

There are a few steps to set up the clock to an automatic state;

  • Click the “clock” icon.
  • Select the “settings” option.
  • Now, select “Change date and time.”
  • On the next display, turn on the options next to automatic “time and date” and “time zone.”
  • By selecting “set date and time” and choosing “time zone,” you can also manually change the time and date if you don’t want automatic settings. 
  • Restart your adapter now, then re-establish your wifi connection.

5. Network Blocking By The Router

It could sometimes happen that the router blocks your network traffic. If this happens and you are unaware, go to your wifi router’s admin login or webpage. The router’s admin page varies depending on the model and brand of the network device.

Consult the handbook for your router, find the appropriate setting, and see if it’s obstructing the network. On the back of specific routers, some have details like login and IP address of the portal.

6. Update your DNS

If there is an issue accessing the web browser through the IP address of the internet service provider, it means there is trouble with their domain name server (DNS). This problem can be resolved by switching to Google DNS, i.e., “;”

  • Open wifi settings
  • Press and hold the wifi network for a few seconds; whose DNS you want to switch
  • Select the option “modify network.”
  • Select static under the option of IP
  • Type the static IP address of DNS1 and DNS2
  • Make sure to save all of your modifications.

7. Change The Mode. of The Wireless Router

Only outdated wifi cards or devices can cause this. Suppose you’ve internet connectivity on other devices. In that case, there is a chance that there may be miscommunication between the router and the Android device as there are many wireless modes on a router.

You may have come across figures like 802.11 b/g/n etc. These wireless standards b, g, n, and ac are different formats.

  • Sign in to the router, go to the dashboard, and search for the wireless option mode.
  • Wireless settings allow you to provide the wifi SSID and password.
  • Now go to the menu, select “802. 11 b,” and save changes. If this doesn’t work, try another one like “802. 11 g,” etc.
  • Confirm to see whether the problem has been fixed after restarting the wifi device.

8. Wifi Router Reboot

Ensure that the wireless option is working and that your android device is not disabled at the system level. Consider restarting the router, regardless of whether you continue using buttons or the admin page on a particular device.

Therefore, select and reboot the router; it will take a little while. If reboot did not resolve the problem, then try resetting the router. I’m sure this will fix your issue because I have fixed mine once.

Remember that all the IP address, ISP, and configuration information will be erased after resetting the router. Ensure to save all the information so that the backup can reconfigure afterward.

9. Reset Settings Of The Android Network

Try resetting the Android network.

  • Go to the “reset” option in the app settings.
  • Choose to reset “wifi connection, mobile data, and Bluetooth.”
  •  The “Reset settings” option is located at the end of the page.
  • Confirm to see whether the issue is fixed by attempting to connect to wifi after a restart.

10. Factory Reset of Android Devices

Factory reset is the final choice, adhere to the instructions below;

  • Navigate to the settings of your smart device
  • Go to the option “reset.”
  • Select the “factory data reset” option
  • Click on the “reset phone” option on the confirmation pop-up.

Important Notice: This process will take some time to make sure your phone is fully charged, and there is no work left in between to worry about.

Android TV Internet Fixes


An Android smart TV gives you accessibility to amazing apps readily saved in one destination. The issues arise when your tv device cannot connect to the internet. Several android tv consumers are facing these issues with wifi connectivity. Thankfully, there are solutions to these issues.

Stay tuned to figure out why you’re having trouble in connection to the device but the Internet not working on android tv. Several fixes for connectivity issues you are encountering on your TV device.

If your Android TV cannot join the internet, there might be a number of reasons why this is the issue. The possibility could be;

  • There is a malfunctioning wifi adapter in the android tv.
  • Airplane mode is active on the android tv device
  • Your router is sending no wifi signals

Note: keep in mind and make sure that your android tv device is not in airplane mode

For further solutions, try to hunt and run the methods that are given below;

  • Check your router settings (as mentioned above)
  • Reboot your android tv device (as mentioned above)

If your tv internet is not fixed via the above method then it can have some of the problems as mentioned below:

1. Internet Issues in Wifi Android Tv

In some cases, despite not always having connectivity to the internet, your Android TV may appear to be online. Although the device catches the wifi signal, it cannot connect to the network for numerous reasons.

There can be a problem with the android tv wifi, and a wide range of actors are responsible for this. The majority of them are related to Android devices or routers. Simply visit an electrician shop to make it check properly.

2. No Coordination Of Time:

There are a few solutions given below to use step by step to check which action works for you;

  • In the top right corner, navigates to “settings” in Android Television.
  • Select “device preferences.”
  • Navigate “date and time.”
  • Select “automatic date and time.”
  • Click on “use network provider time.”

3. Damaged Device:

There is the possibility that your hardware, cable, router, and tv box might be damaged and need to be fixed. Visit the nearest electrician repair shop immediately before it gets worse.

4. Reset Network Settings:

There are simply four steps to follow;

  • Select “settings” from the menu in the top right corner.
  • Confirm to see whether the wifi is working and navigate to “network and internet.”
  • Select “wifi” and then “Forget the network.”
  • By entering your password, you may rejoin the network.
  • This technique might sometimes works if your ISP provider is not making a mess.

5. Reached Limit For Data Saver:

  • Click on the option “settings” on Android tv
  • Choose “data saver” from the above menu after choosing “network and internet.”
  • Click on the “OFF” option.

6. Android Tv Is Still Disconnected Due to WiFi Antenna Damage

Make sure that either Wifi is reconnected or disconnected on your android tv. Sometimes there is a fault in your wifi antenna that is present inside the tv due to which the wifi does not work.

7. Outdated System:

The problem could be in the wireless adapter, and it is necessary to update the software. You can get a new driver or software installed from a hardware shop.

8. Inappropriate Setup:

Set up your android tv correctly through the settings on the device. (explained in the video)

9. Network Reboot:

To make your network work appropriately on Android TV, you should reboot your network.

10. VPN Settings Disable:

VPN might be the barrier between your android tv and your internet network. So, make sure to disable it from settings.


That’s all of the troubleshooting methods we figured out. One of my friends keeps facing issues but the problem was in his wifi router adapter as it broke due to which it was changing the frequency. So, make sure to check each and everything.

Moreover, do not hesitate to share any new ways you find, by using the comment section below. You can also reach out to us via the contact page.

People Also Ask

What is Connect No Internet On Television?

Your TV may be saying “Connect no internet” for a number of reasons. Your cable and router should first be checked to make sure they are both switched in and operational. If they are, the next step is to check your internet connection.

Sometimes, all it takes is unplugging your modem or router for a few seconds and then plugging it back in.

Why Does The Internet Say Connect No Internet?

There are some probable reasons for these notifications.

  1. The first possibility is that the location lacks an operational internet network. It’s possible that the service provider, router, or cable is not the cause of this.
  2. The television’s internet connection may also not be set up correctly on the device, which is another option. This might be due to incorrect internet being picked up or the internet settings are not properly configured.
  3. Finally, it is also possible that a virus or other malicious software has taken control of the TV and is blocking internet access.

What if the internet is connected but no internet?

This issue can occur when your device is connected to a network but cannot access the internet. Possible reasons for this are:

  1. Incorrect network settings
  2. Router/modem problems
  3. Outdated network drivers
  4. ISP service interruption
  5. Firewall block
  6. Fault in your device

Troubleshooting steps to resolve this issue:

  1. Restart your device and router/modem
  2. Check network settings
  3. Update network drivers
  4. Contact your ISP
  5. Disable the firewall temporarily
  6. Visit a mobile repair shop

Similar Posts